Binder KBF-S - Page 82

To Next Page

To Previous Page

KBF-S / KBF-S-UL (E6) 11/2021 page 82/95

Dimensions size 240:

Main Page

Table of Contents2
Safety5
Personnel Qualification5
Operating Manual5
Legal Considerations5
Intellectual Property6
Structure of the Safety Instructions6
Signal Word Panel6
Safety Alert Symbol7
Pictograms7
Word Message Panel Structure8
Localization / Position of Safety Labels on the Chamber8
Type Plate9
General Safety Instructions on Installing and Operating the Chambers10
Intended Use12
Foreseeable Misuse14
Residual Risks14
Operating Instructions16
Measures to Prevent Accidents16
Resistance of the Humidity Sensor against Harmful Substances17
Chamber Description18
Chamber Overview19
Rear Chamber View20
Completeness of Delivery, Transportation, Storage, and Installation21
Unpacking, and Checking Equipment and Completeness of Delivery21
Guidelines for Safe Lifting and Transportation21
Storage22
Location of Installation and Ambient Conditions23
Installation and Connections25
Water Supply25
Types of Suitable Water Quality25
BINDER Pure Aqua Service (Option)25
Installation of Freshwater Supply26
Condensate Collection Pan28
KBF-S / KBF-S-UL 115: Installation of the Condensate Collection Pan29
KBF-S / KBF-S-UL 240, 720, 1020: Installation of the Condensate Collection Pan30
Electrical Connection31
Functional Overview of the Rd4 Chamber Controller32
Menu Structure of the Controller and Access Levels33
Performance During and after Power Failures34
Start up34
Temperature and Humidity Set-Point Entry35
Temperature Set-Point Entry35
Humidity Set-Point Entry36
Special Controller Functions - Turning off the Humidity System, Idle Mode36
Password37
Password Request37
Assign and Modify a Password38
Assign and Modify the User Password38
Assign and Modify the Admin Password39
Temperature Safety Devices39
Over Temperature Protective Device (Class 1)39
Overtemperature Safety Controller Class 3.139
Setting the Safety Controller Mode40
Setting the Safety Controller Value40
Message and Measures in the State of Alarm41
Function Check41
General Controller Settings42
Selecting the Controller's Menu Language42
Selecting the Temperature Unit42
Setting the Current Date43
Setting the Current Time43
Function "Language Selection at Restart44
Setting the Chamber Address44
Display Brightness45
Tolerance Range Settings45
Setting the Delay Time for Tolerance Range Alarm45
Setting the Temperature Tolerance Range46
Setting the Humidity Tolerance Range46
Alarm Functions47
Alarm Messages47
Activating / Deactivating the Audible Alarm (Alarm Buzzer)48
Program Start / Stop Function48
Start Time Program48
Start Week Program48
Stop Program49
Ethernet Network Settings49
Showing the Network Settings49
Showing the Chamber's MAC Address50
Showing the IP Address50
Showing the Subnet Mask50
Showing the Standard Gateway51
Showing the DNS Server Address51
Showing the DNS Chamber Name51
Changing the Configuration of the Network Settings52
Selecting the Type of IP Address Assignment (Automatic / Manual)52
Selecting the Type of Assignment of the DNS Server Address (Automatic / Manual)52
Assigning the IP Address53
Setting the Subnet Mask54
Setting the Standard Gateway54
Assigning the DNS Server Address54
Data Recorder55
Recorded Data55
Storage Capacity56
Setting the Storage Rate for the "DL1" Recorder Data56
Deleting the Data Recorder56
Usb Menu: Data Transfer Via Usb Interface57
Connecting the USB Stick57
Import Function57
Export Functions58
Ongoing Data Transfer58
Error During Data Transmission59
Removing the USB Stick59
Self-Test Function59
Activating the Self-Test Function59
Deactivating the Self-Test Mode60
Humidification / Dehumidification System61
Function of the Humidifying and Dehumidifying System62
Defrosting at Refrigerating Operation63
Options64
APT-COM™ 4 Multi Management Software (Option)64
Data Logger Kits (Option)64
Cleaning and Decontamination65
Cleaning65
Decontamination / Chemical Disinfection66
Maintenance and Service, Troubleshooting, Repair, Testing68
General Information, Personnel Qualification68
Maintenance Intervals, Service68
Service Reminder69
Simple Troubleshooting70
Sending the Chamber Back to BINDER Gmbh72
Disposal72
Disposal of the Transport Packing72
Decommissioning73
Disposal of the Chamber in the Federal Republic of Germany73
Disposal of the Chamber in the Member States of the EU Except for the Federal Republic of Germany74
Disposal of the Chamber in Non-Member States of the EU75
Technical Description76
Factory Calibration and Adjustment76
Over Current Protection76
Definition of Usable Volume76
KBF-S / KBF-S-UL Technical Data77
Equipment and Options (Extract)79
Accessories and Spare Parts (Extract)80
Dimensions81
Certificates and Declarations of Conformity85
EU Declaration of Conformity85
Certificate for the GS Mark of Conformity of the "Deutsche Gesetzliche Unfallversicherung E.V." (German Social Accident Insurance) DGUV88
Contamination Clearance Certificate90
For Chambers Located Outside USA and Canada90
For Chambers Located in USA and Canada93

Binder KBF-S - Page 82

Table of Contents

Related product manuals