Biosite Triage MeterPro - C Haracters P at. ID Min

N-12 Rev F
InStallatIon
N-12
5. Use the keys to select the number to the right of characterS uSer Id under
the mIn column.
6. Use the keys to choose the smallest number of characters that will
appear in the User ID. The minimum number of characters possible is 1.
7. Use the key to select the number to the right of characterS uSer Id under the
max column.
8. Use the keys to choose the largest number of characters that will appear
in the User ID. The maximum number of characters possible is 16.
9. Press the key to save changes.
characterS pat. Id
This setting will set the minimum and maximum number of characters in the Patient ID.
1. From a list of programmable parameters, choose InStrument SettIngS
using the keys.
2. Press the key.
3. Use the keys to select Id SettIngS.
4. Press the key.
5. Use the keys to select the number to the right of characterS pat. Id under
the mIn column.
6. Use the keys to choose the smallest number of characters that will
appear in the Patient ID. The minimum number of characters possible is 1.
7. Use the key to select the number to the right of characterS pat. Id under the
max column.
8. Use the keys to choose the largest number of characters that will appear
in the Patient ID. The maximum number of characters possible is 20.
9. Press the key to save changes.
maIn menu
Set parameterS
meter SettIngS
Id SettIngS