Biosite Triage MeterPro - Print All Results; • Misc. Test Results

O-31 Rev F
operatIon
O-31
prInt all reSultS
Options: All stored results can be printed from the Triage MeterPro Meter’s memory.
 • PatientResults
 • QCSampleResults
 • QCDeviceResults
 • Misc.TestResults
patIent reSultS
To print all Patient Results:
1. Press the key to power The Triage MeterPro Meter on.
2. From the maIn menu select recall reSultS using the keys.
3. Press the key.
4. Select prInt all reSultS using the keys.
5. Press the key.
6. Select patIent reSultS using the keys.
7. Press the key.
8. Type or scan in your identification (User ID). To correct, press to clear the
entire ID, or select the incorrect character by using the keys. Then type
in the correct ID.
9. Press the key to make a printed copy.
Qc Sample reSultS
To print all QC Sample Results:
1. Press the key to power The Triage MeterPro Meter on.
2. From the maIn menu select recall reSultS using the keys.
3. Press the key.
4. Select prInt all reSultS using the keys.
5. Press the key.
6. Select Qc Sample reSultS using the keys.
7. Press the key to make a printed copy.
maIn menu
recall reSultS
prInt all reSultS
maIn menu
recall reSultS
Note: When
printing large
quantities of patient
results, it is
recommended to first
insert a full roll of
paper.
Note: If the User
IDbypassisON,
the meter will not ask
you to enter a User ID.