Biosite Triage MeterPro - Page 75

O-32Rev F
operatIon
O-32
Qc devIce reSultS
To print all QC Device Results:
1. Press the key to power The Triage MeterPro Meter on.
2. From the maIn menu select recall reSultS using the keys.
3. Press the key.
4. Select prInt all reSultS using the keys.
5. Press the key.
6. Select Qc devIce reSultS using the keys.
7. Press the key to make a printed copy.
mISc. teSt reSultS
To print all Misc. Test Results:
1. Press the key to power The Triage MeterPro Meter on.
2. From the maIn menu select recall reSultS using the keys.
3. Press the key.
4. Select prInt all reSultS using the keys.
5. Press the key.
6. Select mISc. teSt reSultS using the keys.
7. Press the key to make a printed copy.
upload reSultS to lIS
When interfaced directly to an LIS, selecting this feature will send all test results
to the LIS. Prior to the first upload, the LIS feature must be activated from the Set
Parameter menu item using the Supervisor Code Chip module.
maIn menu
recall reSultS
prInt all reSultS
maIn menu
recall reSultS
prInt all reSultS
maIn menu
recall reSultS
upload reSultS to lIS