N-26 Rev F
InStallatIon
N-26
teSt SettIngS
In certain cases, the lab supervisor may wish to control which tests are available to be run
at the time of patient testing. The options are:
1. actIve (actIv on Screen): The test is always run and cannot be deselected.
2. InactIve (Inact on Screen): The test is never run and is not displayed.
3. uSer InactIve (uSr I on Screen): The test can be selected by the user at the time of
running the test.
4. uSer actIve (uSr a on Screen): The test can be deselected by the user at the time
of running the test.
If these options are not available for a test, the meter skips over the setting as the
supervisor scrolls through the options. See pages N-26 and 0-8 for more details.
maIn menu
Set parameterS
To Next Page
Loading...
