Biosite Triage MeterPro - Misc. Test

O-9bRev F
operatIon
O-9b
Misc. Test Sample
1. Press the key to power The Triage MeterPro Meter on.
2. Select run teSt using the keys.
The Main Menu
3. Press the key.
4. Type or scan in your identification (User ID). To correct, press to clear
the entire ID, or select the incorrect character by using the keys.
Then type in the correct ID.
5. Press the key.
6. Select mISc. teSt using the keys.
Menu screen as it looks when operator
selects QC Sample.
7. Press the key.
8. Type or scan the Misc. Test identification (Misc. Test ID). To correct, press to
clear the entire ID, or select the incorrect character using the keys.
Then type in the correct ID.
9. Press the key.
10. If the information is correct, press the key to confirm the Misc. Test ID.
If the information is incorrect:
 • Selectcorrect mISc. teSt Id using the keys.
 • Pressthe key.
 • Pressthe key to clear the entire ID, or select the
incorrect character using the keys. Then type in the correct ID.
 • Pressthe key.
maIn menu
run teSt
Note: If the
User ID bypass
is ON, the meter will
not ask you to enter a
User ID.
Note: If the
Bar Code
Scanner is being
used, simply point the
scanner at the bar
code, press the
button on the scanner
handle and wait for
the beep. The ID will
appear on the display.