Biosite Triage MeterPro - QC Sample

O-5 Rev F
operatIon
O-5
maIn menu
run teSt
Note: If the
User ID bypass
is ON, the meter will
not ask you to enter a
User ID.
Note:Only
enter the four
digit numeric value of
the QC lot number
Do not enter the
preceding alpha
character.
The Main Menu
Qc Sample
To run the Quality Control sample:
1. Press the key to power The Triage MeterPro Meter on.
2. Select run teSt using the keys.
3. Press the key.
4. Type in your identification (User ID). To correct, press the key to
clear the entire ID, or select the incorrect character by
using the
keys. Then type in the correct ID.
5. Press the key.
6. Select Qc Sample using the keys.
7. Press the key.
8. Enter the QC lot number from the label on the side of the vial containing the QC
Sample.
Menu screen as it looks when operator
selects QC Sample.