Biosite Triage MeterPro - Isc

N-14 Rev F
InStallatIon
characterS mISc. Id
This setting will set the minimum and maximum number of characters in the Misc. Test ID.
1. From a list of programmable parameters, choose InStrument SettIngS
using the keys.
2. Press the key.
3. Use the keys to select Id SettIngS.
4. Press the key.
5. Use the keys to select the word to the right of characterS mISc. Id under
the mIn column.
6. Use the keys to choose the smallest number of characters that will
appear in the Misc. test iD. The minimum number of characters possible is 1.
7. Use the key to select the number to the right of characterS mISc. Id under the
max column.
8. Use the keys to choose the largest number of characters that will appear
in the Misc. test iD. The maximum number of characters possible is 20.
9. Press the key to save changes.
dISplay SettIngS
language
This setting will determine which language the meter displays and prints.
1. From a list of programmable parameters, choose meter SettIngS
using the keys.
2. Press the key.
3. Use the keys to select dISplay SettIngS.
4. Press the key.
5. Use the keys to highlight the name to the right of language.
6. Use the keys to change the language of the Triage MeterPro Meter’s screen and
printouts.
7. Press the key to save changes.
maIn menu
Set parameterS
meter SettIngS
dISplay SettIngS
maIn menu
Set parameterS
meter SettIngS
Id SettIngS