Biosite Triage MeterPro - Patient Results

O-11 Rev F
operatIon
O-11
8. The results from the last test run appear on the screen.
9. Use the keys to view the entire patient record.
10. Press the key to make a printed copy.
patIent reSultS
Options: Patient results can be retrieved based on a variety of criteria:
 • PatientID
 • TestDeviceLotNumber(L/N)
 • UserID
 • FromDate
 • TillDate
patIent Id
To retrieve results based on the patient ID:
1. Press the key to power The Triage MeterPro Meter on.
2. From the maIn menu select recall reSultS using the keys.
3. Press the key.
4. Select patIent reSultS using the keys.
5. Press the key.
6. Type or scan in your identification (User ID). To correct, press to clear the
entire ID, or select the incorrect character by using the keys. Then type
in the correct ID.
7. Press the key.
8. Select PANEL TYPE using the keys.
9. Use the keys to select the desired panel
10. Choose the results you want to see:
 • Ifyouwanttoseeallpatientresults,pressthe key. All the patient
results in the Triage MeterPro Meter’s memory for the selected panel will be
displayed.
 • Forindividualpatientresults:
a. Select Patient ID using the keys.
b. Type or scan in the patient ID. To correct, press the key to clear the
maIn menu
recall reSultS
maIn menu
recall reSultS
patIent reSultS
Note:Youmay
choose more
than one of the
options for recalling
results in order to
define more precisely
the information you
want to recall from
the Triage MeterPro
Meter’s memory.
When you choose
multiple options, first
input values in all the
categories you have
chosen. Then press
theENTERkey.
Note: If the
User ID bypass
is ON, the meter will
not ask you to enter a
User ID.