O-35 Rev F
operatIon
Display Backlight
O-35
DISPLAY BACKLIGHT
The Triage MeterPro Meter has the capability for the operator to backlight the display for
providing improved clarity depending on ambient lighting conditions. The backlight feature
can be controlled by the backlight button on the keypad.
When the backlight button is pressed, the backlight initially comes on at maximum
brightness. Subsequent presses cycle the backlight from bright to dim and then to off.
To save power, the backlight turns off if no keys have been pressed for 15 seconds.
Pressing any key will restore the backlight to the previous level.
To Next Page
Loading...
