Biosite Triage MeterPro - Page 33

N-23Rev F
InStallatIon
N-23
update uSer Id
1. From the list of programmable parameters, choose uSer Id
using the keys.
2. Press the key.
3. Select update uSer Id using the keys.
4. Press the key.
5. Type in the user ID you want to update. To correct, press the key
to clear the entire ID, or select the incorrect character by
using the keys. Then type in the correct ID.
6. Press the key.
7. The user ID is displayed with the expiration date. You can change the expiration
date to 6 monthS, 12 monthS, expIred or valId by using the keys. valId
reconfirms the previously selected interval.
8. Press the key to save changes.
delete uSer Id
1. From the list of programmable parameters, choose uSer Id
using the keys.
2. Press the key.
3. Select delete uSer Id using the keys.
4. Press the key.
5. Type in the user ID to be deleted. To correct, press the key
to clear the entire ID, or select the incorrect character
by using the keys. Then type in the correct ID.
6. Press the key. The message on the screen states:
uSer Id ### wIll Be deleted.
7. Press the key to delete. A message on the screen tells you that the
ID has been deleted: uSer Id ### deleted.
maIn menu
Set parameterS
uSer Id
Note: If you
type in a User
ID number that does
notexist,themessage
on the screen states:
USERID###DOES
NOTEXIST.
If this happens, press
the ENTER key to
return to the previous
screen and correct
the ID or press the
EXIT key.
Note: If you
type in a User
ID number that does
notexist,themessage
on the screen states:
USERID###DOES
NOTEXIST.
If this happens, press
the ENTER key to
return to the previous
screen and correct
the ID or press the
EXIT key.