Biosite Triage MeterPro - Page 56

O-13 Rev F
operatIon
O-13
teSt devIce lot numBer (l/n)
To retrieve results based on the lot number of the test devices used:
The lot number of the test device is found on
the device and on the outer box
1. Press the key to power The Triage MeterPro Meter on.
2. From the maIn menu select recall reSultS using the keys.
3. Press the key.
4. Select patIent reSultS using the keys.
5. Press the key.
6. Type or scan in your identification (User ID). To correct, press to clear the
entire ID, or select the incorrect character by using the keys. Then type
in the correct ID.
7. Press the key.
8. Select panel type using the keys.
9. Use the keys to select the desired panel.
10. Select devIce l/n using the keys.
11. To display all results for the selected panel, press the key.
12. To display results specific to one lot, type in the lot number of the test device. To
correct, press the key to clear the entire number. Then type in the correct
number.
13. Press the key.
14. All results from tests run on the requested lot number for the selected panel are
displayed.
15. Use the keys to view the entire record.
maIn menu
recall reSultS
patIent reSultS
Note: only enter
the five digit
numeric value of the
QC lot number.
Note: If the
User ID bypass
isON,themeterwill
not ask you to enter a
User ID.