Biosite Triage MeterPro - Page 60

O-17 Rev F
operatIon
O-17
tIll date
To retrieve results from tests run on the Triage MeterPro Meter before and including a
date you select:
1. Press the key to power The Triage MeterPro Meter on.
2. From the maIn menu select recall reSultS using the keys.
3. Press the key.
4. Select patIent reSultS using the keys.
5. Press the key
6. Type or scan in your identification (User ID). To correct, press to clear the
entire ID, or select the incorrect character by using the keys. Then type
in the correct ID.
7. Press the key.
8. Select panel type using the keys.
9. Use the keys to select the desired panel.
10. Select tIll date using the keys.
11. To display all results for the selected panel, press the key.
12. To display results specific to one date, type in the date. To correct, press the
to clear the entire number. Then type in the correct number.
13. Press the key.
14. All results from tests run before and including the date you selected for the selected
panel are displayed.
15. Use the keys to view the entire record.
16. Press the key to make a printed copy.
17. Press the key to upload the selected results to LIS.
Note: If the
User ID bypass
isON,themeterwill
not ask you to enter a
User ID.
maIn menu
recall reSultS
patIent reSultS