Biosite Triage MeterPro - Page 66

O-23 Rev F
operatIon
O-23
tIll date
To retrieve QC results from tests run on the Triage MeterPro Meter before and including a
date you select:
1. Press the key to power The Triage MeterPro Meter on.
2. From the maIn menu select recall reSultS using the keys.
3. Press the key.
4. Select Qc reSultS using the keys.
5. Press the key.
6. Select the appropriate menu, Qc Sample reSultS or Qc devIce reSultS using the
keys.
7. Press the key.
8. If Qc Sample reSultS, select panel type using the keys.
Use the keys to select the desired panel.
9. Select tIll date using the keys.
10. Press the key.
11. Type in the date. To correct, press the key to clear the entire number. Then
type in the correct number.
12. Press the key.
13. All results from tests run before and including the date selected, for the selected
panel if QC Sample, are displayed.
14. Use the keys to view the entire record.
15. Press the key to make a printed copy.
16. Press the key to upload the selected results to LIS.
maIn menu
recall reSultS
Qc reSultS
Qc Sample reSultS
Qc devIce reSultS