I-7Rev F
IntroductIon
I-7
Power button Used to turn the Triage MeterPro Meter on and off.
Print Button Used to print the test results or display screen.
Delete Button Used to delete data.
Enter Button Allows the operator to select menu items and acknowledge
alarm conditions.
Exit button Used to exit the displayed menu or eject the test device.
Keypad Used to enter identification numbers, letters, and special symbols.
Arrow Buttons Used to toggle through menu items.
Thermal Printer Prints the test result on paper.
Data Port Connection point for the (optional) Bar Code Scanner, allowing
the operator to scan patient or user identification data instead of
manually entering numbers or letters on the keypad. May also be
used to connect to a data management system/LIS.
Code Chip module Port Insertion point for Code Chip modules which contain lot / device
specific data for use in providing test results.
Power Supply Port Connection point for the supplied AC / DC Power Converter.
Printer Cover The cover, which when pulled straight up, reveals the paper roll.
LCD Screen The LCD (Liquid Crystal Display) Screen shows the menu of
possible tests and tasks and prompts the operator to take the
next step.
To Next Page
Loading...
