Biosite Triage MeterPro - Page 70

O-27 Rev F
operatIon
teSt devIce lot numBer (l/n)
To retrieve results based on the lot number of the test devices used:
The lot number of the test device is found on
the device and on the outer box
1. Press the key to power The Triage MeterPro Meter on.
2. From the maIn menu select recall reSultS using the keys.
3. Press the key.
4. Select mISc. teSt reSultS using the keys.
5. Press the key.
6. Select panel type using the keys.
7. Use the keys to select the desired panel.
8. Select devIce l/n using the keys.
9. To display all results for the selected panel, press the key.
10. To display results specific to one lot, type in the lot number of the test device. To
correct, press the key to clear the entire number. Then type in the correct
number.
11. Press the key.
12. All results from tests run on the requested lot number for the selected panel are
displayed.
13. Use the keys to view the entire record.
14. Press the key to make a printed copy.
15. Press the key to upload the selected results to LIS.
maIn menu
recall reSultS
mISc. teSt reSultS
Note: only enter
the five digit
numeric value of the
QC lot number.