vii
Chapter Layout
Introduction — Lists the components included in the RF Test Set.
FlightHawk-AV Basic Operation — Provides brief information on
commonly used settings for the FlightHawk-AV.
Calibration — Provides a procedure for calibrating the FlightHawk-AV prior to
making measurements.
Measure Match Mode — Details the use of the Measure Match Mode,
includes instructions for performing the test and provides instruction for
interpreting measurement.
Fault Location Mode — Details the use of the distance to fault
measurement, includes instructions for performing the test and provides
instruction for interpreting measurement.
Data Save and Export — Instructs the user on methods for saving
FlightHawk-AV generated data and methods for exporting the data to external
devices.
RF Power Measurement — Provides instruction on the use of the Bird RF
Meter App and the Wideband Power Sensor, includes instructions for utilizing
the RF power measurement capabilities of the power sensor.
Maintenance — Includes maintenance procedures for the RF Test Set.
Specifications — Includes specifications for the equipment contained in the
RF Test Set.
Automated Operation — Provides an introduction to the FlightHawk-AV user
interface.
To Next Page
Loading...
