Need help?Do you have a question about the BIRD FlightHawk and is the answer not in the manual?
General| Return Loss | 0 to 60 dB |
|---|---|
| Impedance | 50 Ohms |
| Display | 7-inch touchscreen |
| Data Storage | Internal memory, USB export |
| Displayed Average Noise Level | -150 dBm |
| VSWR | 1.0 to 65.0 |
Explains the meaning of safety symbols used in the manual and on the equipment.
Lists important safety warnings and precautions for safe operation and maintenance.
Details safety cautions to prevent damage to the instrument or system.
Lists all the components included in the FlightHawk RF Test Set package.
Describes the FlightHawk-AV as a multifunction test instrument for RF systems.
Details the user interface, display area, menus, and control options.
Lists the default configurations and settings for the FlightHawk-AV analyzer.
Explains how to manually set measurement frequencies and frequency spans.
Covers manual adjustments for displayed traces and grid scale values.
Provides step-by-step instructions for calibrating the FlightHawk-AV analyzer.
Explains how to select match modes and measurement units for the analysis.
Describes how to interpret the results of a match measurement on the graph.
Details the procedure for performing and interpreting cable loss measurements.
Instructions on connecting the FlightHawk-AV to the power sensor.
Outlines the steps for performing RF power measurements.
Explains how to zero the sensor to ensure accurate RF power readings.
Provides instructions on how to clean the FlightHawk-AV analyzer safely.
Explains the procedure for charging the unit's internal battery.
Instructions on how to edit the cable list for accurate measurements.
Describes the two modes of operation: Automatic and Advanced.
Details the features and usage of the Automatic Mode for predefined tests.
Explains how to use the Advanced Mode for manual configuration and testing.
To Next Page
