The Blackmagic Videohub Hardware Panel Setup automatically
searches your network for any Videohub control panels
You will also need to complete the IP details for the remote Videohub that you wish to control
with your Videohub control panel. The remote Videohub is the Videohub Server. This could
refer to a Videohub Server computer or an integrated Videohub Server onboard a Videohub
model such as Smart Videohub 20x20.
Any Ethernet or USB connected control
units will be listed in the Videohub Control
Panels pane with a corresponding icon
Blackmagic Videohub Hardware
Panel Setup network settings
66Videohub Hardware Panel Setup
To Next Page
Loading...
