The next three blocks describe the routing of the output, monitoring and serial ports.
VIDEO OUTPUT ROUTING:↵
0 5↵
1 3↵
…
↵
VIDEO MONITORING OUTPUT ROUTING:↵
0 7↵
1 8↵
…
↵
SERIAL PORT ROUTING:↵
0 12↵
1 11↵
…
↵
Videohubs with processing units (only the Workgroup Videohub) send an extra routing block:
PROCESSING UNIT ROUTING:↵
0 5↵
1 3↵
…
↵
Videohubs with frame buffers (only the Workgroup Videohub) send two extra blocks:
FRAME LABELS:↵
0 Frame one↵
1 Frame two↵
…
↵
FRAME BUFFER ROUTING:↵
0 7↵
1 8↵
…
↵
The next three blocks describe the locking status of the output, monitoring and serial ports.
Each port has a lock status of “O” for ports that are owned by the current client (i.e., locked from
the same IP address), “L” for ports that are locked from a different client, or “U” for unlocked.
Note that Videohubs that do not have monitoring ports or serial ports do not send the
corresponding blocks.
VIDEO OUTPUT LOCKS:↵
0 U↵
78Developer Information
To Next Page
Loading...
