Blodgett ZEPHAIRE-G Troubleshoot Manual (English)

Other manuals for Blodgett ZEPHAIRE-G

Operating And Troubleshooting Guide2 pages

Replacement Parts List7 pages

Specifications2 pages

Installation Operation & Maintenance58 pages

Questions and Answers:

A
ahendersonJul 26, 2025
What to do if my Blodgett ZEPHAIRE-G will not fire?
- A
  Anna BooneJul 26, 2025
  If your Blodgett Convection Oven won't fire, there are several potential causes. First, ensure the gas is turned on. The gas valve should be in the ON position. Next, verify the oven is properly plugged into the electrical outlet. Also, check that the power switch on the control panel is set to COOK or OVEN ON. Make sure that the control is set to the desired cooking temperature and not below ambient temperature. Finally, ensure that the oven doors are fully closed.
L
Lori JonesJul 31, 2025
Why won't my Blodgett Convection Oven come to ready?
- J
  Joyce HayesJul 31, 2025
  Your Blodgett Convection Oven might not reach the ready temperature for a few reasons. First, allow sufficient time for the oven to preheat. Then, check that the gas valve is fully turned on. Also, ensure the quick disconnect is properly connected. Low gas pressure can also prevent the oven from reaching temperature, so inspect all gas connections. If none of these steps work, the issue might be with the main temperature control, and you should contact your local gas representative.
E
Emily MccoyAug 7, 2025
Why Blodgett Convection Oven does not come to ready?
- B
  Bethany BakerAug 7, 2025
  If your Blodgett Convection Oven does not reach the ready state, consider the following: * The oven may not have finished preheating. Allow sufficient time for the oven to reach the preheat temperature. * The gas valve might not be fully open. Verify that the gas valve is completely turned on. * The quick disconnect could be improperly connected. Reconnect the quick connect and inspect all gas connections. * The gas pressure to the oven may be insufficient. Contact your local gas representative to check the gas pressure. * There might be an internal issue with the main temperature control.
K
Kayla LeeAug 13, 2025
How to fix convection fan that does not run in Blodgett ZEPHAIRE-G Convection Oven?
- R
  Randy CrawfordAug 13, 2025
  If the convection fan in your Blodgett Convection Oven isn't running, check these items: 1. Ensure the oven is properly plugged into the electrical outlet. 2. Check the circuit breaker and reset it if it has tripped. 3. Make sure the oven doors are fully closed.
K
Kenneth LopezAug 19, 2025
How to fix a Blodgett Convection Oven when the convection fan does not run?
- R
  rachel02Aug 19, 2025
  If the convection fan in your Blodgett Convection Oven isn't running, start by ensuring the oven is plugged into the electrical supply cord. If it is, check the circuit breaker and reset it if it has tripped. Also, make sure that the oven doors are fully closed, as the fan may not operate if the doors are open.

Blodgett ZEPHAIRE-G Specifications

General

Pan Size	18" x 26"
Temperature Range	200°F to 500°F
Controls	Solid State
Configuration	Single Deck
Construction	Stainless steel front, top, and sides
Warranty	1 year parts and labor