EP600 Energy Storage System User Manual
Before connecting the power supply, make sure the Energy Storage System is not
damaged, otherwise it may cause danger. Make sure the Energy Storage System
and all relevant switches are in the "OFF" state, otherwise it may cause the electric
shock.
All installation must only be operated by professionals or authorized
personnel.
The specification of cables which used for solar panel must proper, firm
connection and good insulation. Incorrect wiring may damage the Energy
Storage System , such resulting damage will not within the warranty.
The EP600 energy storage system can be grid-connected for power generation
only with the permission of the electricity power department of the country or
region.
Precaution of operation
When the Energy Storage System is running, please do not touch any terminal of the
Energy Storage System, otherwise it may cause the electric shock. When the Energy
Storage System is running, the shell temperature is high, please do not touch it, otherwise
it may cause the burn injure.
In the process of moving the Energy Storage System, the weight of Energy Storage
System shall be considered and take care of the balance to avoid the Energy Storage
System overturn or fall.
Precaution of repair and maintenance
In the process of operating the Energy Storage System, there exist high voltage
which may cause electric shock, result in the casualty or serious damage of
personal injury and property. Therefore, the Energy Storage System must be shut
down and powered off before operate any maintenance, and the precaution of
safety which listed in this guidebook and other relevant documents must be
strictly followed when operating the Energy Storage System.
To Next Page
Loading...
