Bluetti EP600 - Page 72

EP600 Energy Storage System User Manual
71
67. -96.
97.
Grid Voltage High
If it occurs occasionally, the grid may go through
abnormal working conditions. The inverter recovers
after the grid resumes.
If it occurs many times, check if the grid voltage
and frequency supports the inverter input
specifications. Check the inverter AC circuit breaker
and connections. If the voltage and frequency is
beyond the range, please contact BLUETTI support
team.
98.
Grid Voltage Low
99.
Grid Over Frequency
100.
Grid Low Frequency
101.
Grid Oscillation
102.
Grid Loss
103.
PV1 Voltage Low
Check the PV setup. Solar panels may get a low
voltage without proper working conditions.
104.
PV2 Voltage Low
105.
106.
Generator Voltage Anomaly
107.
DSP_Debug CAN
Communication Failure
108.
DSP_Debug RS485
Communication Failure
109. -128.
129.
EEPROM Read and Write
Anomaly
Please reconfigure the settings on BLUETTI app. If the
symptom persists, please contact BLUETTI support
team.
130.
Grid Voltage High-ARM
If it occurs many times, check if the grid voltage and
frequency supports the inverter input specifications.
Check the inverter AC circuit breaker and
connections. If the voltage and frequency is beyond
the range, please contact BLUETTI support team.
131.
Grid Voltage Low-ARM
132.
Grid Over Frequency-ARM
133.
Grid Low Frequency-ARM
134.
USB Format Error
Please make sure the USB is formatted as FAT32 and
its maximum memory is 32G.
Check if the upgrade files exist or expire. Please
download the latest upgrade files.
135.
USB Upgrade Failure
Turn on the inverter again. If the symptom persists,
please contact BLUETTI support team.