Bluetti EP600 - Troubleshooting and Specifications; 10. Troubleshooting

EP600 Energy Storage System User Manual
70
42.
43.
Inverter Output Failure
44.
45.
46.
Over Temperature Protection
47.
Communication Failure
Turn off the inverter and wait 30 minutes to restart
up it. If the symptom persists, please contact
BLUETTI support team.
48.
49.
DSP Communication
Interrupted
Turn off the inverter and wait 30 minutes to restart
up it. If the symptom persists, please contact
BLUETTI support team.
50.
BMS Communication
Interrupted
Turn off the inverter and wait 30 minutes to
restart up it. If the symptom persists, please
contact BLUETTI support team.
51.
IOT Communication
Interrupted
52.
Zero Drift Anomaly-ARM
Turn off the inverter and wait 30 minutes to restart
up it. If the symptom persists, please contact
BLUETTI support team.
53.
RTC Read and Write
Anomaly
54.
Inverter Leakage Current
High
55.
Operating Ambient
Temperature Anomaly
Please make sure use the system within specific
temperature range. If the symptom persists, please
contact BLUETTI support team.
56.
Temperature 1 Anomaly
57.
Temperature 2 Anomaly
58.
Temperature 3 Anomaly
59.
Temperature 4 Anomaly
60.
BMS Charge Protection
Check the details on BLUETTI app.
61.
BMS Discharge Protection
62.
BMS System Failure
63. -64.
65.
PV Voltage Too High
66.
LLC Output Voltage Low