Boeing 737 - Trailing Edge Flap Asymmetry

737 Flight Crew Operations Manual
9.30
Boeing Proprietary. Copyright © Boeing. May be subject to export restrictions under EAR. See title page for details.
D6-27370-4Q8-SJA
9.30
1 Set the flap lever to the nearest detent that is equal
to or less than the smallest indicated flap position.
Caution! Do not attempt to move the trailing
edge flaps with the ALTERNATE FLAPS
switch because there is no asymmetry
protection.
▼ Continued on next page ▼
Trailing Edge Flap Asymmetry
Condition:
One or more of these occur:
•An uncommanded roll occurs when the
flaps change position
•The left and right flap indications
disagree.
Objective:
To configure the airplane for landing.
Note: Do not use FMC performance predictions
with any flaps or slats extended.
December 20, 2018