106
Manual version: 1.01/ Febr. 2017
Manual rev.: 1
Údržba stroje
Wartung /
36. Install the washer and screw on the driving wheel.
37. Install the saw band.
4.9.6. Cooling pump replacement
1. Disconnect the machine from electrical network.
2. Pull out the tank from the pedestal as far as possible.
3. Pull out the cooling pump from the tank and disconnect the hose for the
coolant distribution from the pump.
Warning!
Only a qualified technician can
perform the installation!
Electrical accidents can be fatal!
To Next Page
Loading...
Need help?
General