90
Manual version: 1.01/ Febr. 2017
Manual rev.: 1
Údržba stroje
Wartung /
4.5.5. Tool cleaning machines from chips after cutting.
- optional accessory
With custom pump (min. capacity 16 l / min.) The coolant gets into the rinsing pistol
with the trigger lever.
Sufficient pressure to the chips and debris were eliminated from the bearing
surfaces of the base material and the saw.
Gun cleaning machine from the chip is supplied with a sufficient supply hose for
easy handling (diameter of 12/8 mm).
Package includes:.
1. Ergonomic handle allows easy handling of the gun during cleaning machine.
2. Brass adjustable nozzle allows for smooth width rinse stream.
To Next Page
Loading...
Need help?
General