EasyManuals Logo

Bomar Ergonomic Series User Manual

Bomar Ergonomic Series
189 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
15
Bezpečnostní pokyny
Sicherheitshinweise
Safety notes
Operate the machine only when you are fit enough to work. Illnesses or injuries
diminish concentration. Avoid machine work, which may compromise the safety of
you and your colleagues!
1.3. Safety notes for machine operator
Machine can only be operated only by one person at a time. Machine operator is
responsible for other people present near the machine.
The person who is operating the machine using the control elements (control panel
and other) must not either alone or with help of other workers move the cut or
otherwise machined material at the same time.
Close covers before starting the machine and check, if the covers are not damaged.
Damaged covers must be repaired or replaced immediately. Do not start the
machine, if any cover is removed!
Check, if the electric cables are not damaged.
Do not hold or manipulate the material during clamping or cutting!
Do not operate the buttons and switches on the control panel wearing gloves!
You may press a wrong button.
Make sure, that there is nobody in the working area of the machine (the
working area of the vice, the saw band, the saw arm etc.) during a working
cycle and when starting the machine.
Under no circumstances touch any rotating elements.
Use the machine only when it is in a good condition!
Check at least once in a shift, if the machine is not visibly damaged. If you
discover any such damage, you must bring the machine to a halt and inform
your superior!
Keep your working area and machine clean and uncluttered! Ensure sufficient
lighting in the working area.
Attention!
Do not connect the machine to electricity if the door or
any covers are removed. Do not touch the high voltage
electrical equipment (transformers, motors, terminals
or wiring
)
.
Follow the instructions and directives for work safety!
Read the operating instructions before you start to work on
the machine! Keep the operating instructions in good
condition!
Attention!
Machine can only be operated by a person older than 18
years!
Machine can be operated only by a person physically and
mentally fit for this activity.
Attention!
Mind the safety signs on the machine. Do not remove or
damage them!

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Bomar Ergonomic Series and is the answer not in the manual?

Bomar Ergonomic Series Specifications

General IconGeneral
BrandBomar
ModelErgonomic Series
CategorySaw
LanguageEnglish

Related product manuals