94
Manual version: 1.01/ Febr. 2017
Manual rev.: 1
Údržba stroje
Wartung /
4.6.4. Hydraulic oils
Replace the hydraulic oil once every 2 years, because the oil properties can
deteriorate and cause problems with the hydraulic equipment. If the hydraulic
system is equipped with filter (2SF 56/48-0,063), replace the filter too.
Filling plug is located on top of the tank, drain hole is located at the bottom of the
tank.
Use oils with specification DIN 51524-HLP, ISO 6743-4 and viscosity class ISO VG 32
in hydraulic aggregates. Hydraulic oils quantity – see chapter Hydraulic oil level
check.
Comparative table of the hydraulic oils:
Manufacturer Type Manufacturer Type
Agip Oso 32 Ina Hidraol 32 HD
Aral Vitam GF 32 Klüber Lamora HLP 32
Avia Avilub RSL 32 Hungary Hidrokomol P 32
Benzina OH-HM 32 Mobil Mobil DTE 25
BP Energol HLP 32 ÖMV HLP 32
Bulgaria MX-M/32 Poland Hydrol 30
Castrol Hyspin AWS 32 Rumania H 32 EP
Čepro Mogul HM 32 Russia IGP 30
DEA Astron HLP 4hy6 Shell Tellus Oil 32
Elf Elfolna 32 Sun Sunvis 846 WR
Esso Nuto H 32 Texaco Rando HD B 32
Note:
When replacing the oil, use oils recommended by BOMAR or
oils, from other manufacturers which have comparable
parameters. Do not forget, that mineral and synthetic oils
must not be mixed!
To Next Page
Loading...
Need help?
General