4
Manual version: 1.01/ Febr. 2017
Manual rev.: 1
EC Declaration of Conformity
1) 2)
We: BOMAR, spol. s r.o.
Těžební 1236/1
627 00 Brno, Czech Republic
Id. No: 48908827
declare herewith
that the following designated device based on its conception and construction as well as the design launched by us
meets the relevant basic safety requirements of the decrees of the government.
This statement applies exclusively to the machine device in conditions in which it was brought to the market. It does
not apply to parts subsequently added by the end user or to modifications performed subsequently by the end
user.
In the event of any device modification not approved by us this declaration shall lose its validity
Name: Band Saw
Type : Ergonomic 340.278 DGH
Serial number: 011 - 999
Manufacturer BOMAR, spol. s r.o., Těžební 1236/1, 627 00 Brno
Product data
Determination: for cross dividing and cutting of rolled and towed bars and profiles made of steel, stainless
steel, non-ferrous metals and plastics
Description: Stand, table, cutting unit with the saw band and drive, clamping device, cooling
system, el. switch board with control panel.
Pneumatic NO YES Hydraulic NO YES
Control system NO YES
Technical data: Cutting rate 20-120 m.min
-1
Cutting angle -45°- bis-60°
Total dimensions in mm (l×w×h) 2000x1570x1760
Total power requirement 2,1 kW
Weight 410 kg
Documentation:
Technical documentation for this machine device was elaborated in compliance with Government regulation no. 176/2008,
Annex 7, part A.
The device meets relevant requirements of the given directives: 2006/42/EC
2014/30/EU
The applied harmonized standards, National standards and technical specifications:
ČSN EN ISO 12100:2011 ČSN EN 13898+A1:2009 ČSN EN ISO 13857:2008
ČSN EN 60204 -1 ed.2+A1:2009
ČSN EN 55011 ed.3+A1:2011 ČSN EN 61000-6-2 ed.3:2006 ČSN EN 61000-6-4 ed.2+A1:2011
The product is safe on condition of the common and determined usage.
The conformity judging was performed according to §12, par. 3, let. a), of the Law no. 22/1997 Coll. as amended.
The declaration of conformity was carried out in the cooperation with the
3)
TÜV SÜD Czech s.r.o, Novodvorská 994, 142 21
Prague 4 – Czech Republic, Identification number: 63987121 - Inspection body no. 4002.
The inspection certificate no 07.801.283 was issued
Brno, 1.11.2016 Alfred Pichlmann, Managing Director
Point of issue, datum
Name and function of the responsible
subject, signature
1) Name, address and identification number of the subject issuing the conformity declaration (producer of importer)
2) Person authorized to complete the technical documentation
3) The authorized or accredited body co-operating on the conformity judging
To Next Page
Loading...
Need help?
General