Bosch DS7240-UK - Alarm Response for Help Function Keys; Alarm Output Option for Help Function Keys

Page 82 P/N: 4998122677Cr1 Copyright  2003 Bosch Security Systems DS7240-UK Reference Guide
PART III: PANEL PROGRAMMING
34.2 Alarm Response for Help Function Keys
• Address:
• Alarm Response for [1]+[3] Keys: 0695
• Alarm Response for [4]+[6] Keys: 0697
• Alarm Response for [7]+[9] Keys: 0699
• Default: 0 (No Alarm Response)
• Selections:
• 0 = No Alarm Response
• 1 = Activate Fire Alarm Response
• 2 = Activate Panic Alarm Response
• 3 = Activate Emergency Alarm Response
34.2.1 Parameter Description
This parameter determines the alarm response for the Help Function keys.
34.2.2 Parameter Options
• Fire Alarm Response: Displays “Fire Alarm Key #” at the text keypads. If programmed, the panel sends a Fire Alarm [75]
report and activates the Fire Alarm output.
• Panic Alarm Response: Nothing is displayed and no sounds are emitted at the keypads. If programmed, a Panic [6] report
is sent and the Burglary Alarm output is activated.
• Emergency Alarm Response: Displays “Alarm Key #” at the text keypads. If programmed, an Emergency Alarm [4] report
is sent and the Burglary Alarm output is activated.
The following letters are assigned to the Help Function keys and will appear in the alarm response message that
is displayed by the text keypad:
• [1]+[3] = A
• [4]+[6] = B
• [7]+[9] = C
For example, if Fire Alarm Response is assigned to keys [1]+[3], then “Fire Alarm Key A” appears. If Emergency
Alarm Response is assigned to keys [1]+[3], then “Alarm Key A” appears.
34.3 Alarm Output Option for Help Function Keys
• Address: 0700
• Default: See table below
• Selections: 0-7
Enter This Data Digit to Select Options
Alarm Output Options 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
No Alarm Output for Keypad Help Function Keys
••
Alarm Output for [1] + [3] Keys
•• •• •• ••
Alarm Output for [4] + [6] Keys
•• •• •• ••
Alarm Output for [7] + [9] Keys
•• •• •• ••
Reserved
Default
34.3.1 Parameter Description
Use this parameter to assign an alarm output option to the Help Function keys. The alarm output will activate for the response
type assigned to each key sequence. This is a global parameter that affects all areas.