DS7240-UK Reference Guide Copyright 2003 Bosch Security Systems P/N: 4998122677Cr1 Page 89
PART III: PANEL PROGRAMMING
35.2 Location ##, Zone Function
• Address: See Table 20
• Default: See Table 20
• Selections: 0-15 (see Table 21 for Zone Function Types)
35.2.1 Parameter Description
The Zone Function determines how the system responds to faults on the sensor loop assigned to the location.
• 24-hour Zone: 24-hour zones are always on and cannot be turned off by the user.
• Controlled Zone: Controlled zones are turned on and off when the user turns the system on (armed) and off (disarmed).
See Table 21 for Zone Function type selections.
Selection Zone Function Type
0 Disabled
1 24-hour Fire
2 24-hour Fire with Alarm Verification
3
24-hour Control Input
See page 90 for additional selections.
4 24-hour Tamper
See page 90 for additional selections.
5 24-hour Emergency
6 24-hour Visible Panic
7 24-hour Invisible Panic
24-hour Zones
8 24-hour Burglary
9 Controlled Follower (Perimeter)
10 Controlled Keyswitch
See page 91 for additional selections.
11 Controlled Entry/Exit Delay 1
12 Controlled Entry/Exit Delay 2
13 Controlled Follower
14 Controlled Instant
Controlled Zones
15 Controlled Instant (Perimeter)
Table 21: Zone Function Type Selections
To Next Page
