FPD-7024 | Operation and Installation Guide | 5.0 Control Panel Programming
78
Bosch Security Systems, Inc. | 1/10 | F01U008458-03
After the device is successfully deleted, you return to the Device Type (MUX Edit) sub-menu. An
unsuccessful deletion results in an error message (see below) followed by the Device Type (MUX Edit) sub-
menu.
ERROR –
DEVICE FAILED
If you remove one point of a dual point address (for example, a D7042 Eight Point Input Module),
the second point (and subsequent points) at this address are also removed. For example, if the
first point of a D7042 is removed, the remaining seven points are also removed.
To Next Page
Loading...
