B
C
If in doubt, look it up
113
Menu items on the display
"
Y
our telephone has been factory-set so that while connected all key de
-
pressions can be sent as tones. Y
ou can also turn of
f this function and
initiate the postdialing manually while connected.
(only
TH and
TM
) With this you can additionally adjust the setting for hands
-
free
talking to room conditions. Y
our telephone must be designed with the
comfort handsfree equipment for this. If necessary
, consult your BOSCH
TELECOM Service.
Here you can define the baud rate of your telephone for data transmission.
A
vailable values are 1200, 2400, 4800 and 9600.
This menu item only appears if you have set the AEI mode of operation to
”A
T command”.
If a called party is busy
, you can program your phone to transmit a signal as
soon as the line is free again. Y
our phone and the phone of the previously
busy subscriber then ring and you can set up the call.
However
, this is only possible for calls within your system. Y
ou can request
several callbacks.
Y
ou can divert calls to other telephones, even external ones. If you receive
a diverted call, the caller‘s name appears on your display if it is stored in
your local telephone book.
Y
ou can activate or deactivate the call list.
Enter the external line code that is entered in the call list with your calls.
Enter the external code that you normally use for external calls.
Autom.
post dialing/DTMF
( p. LEERER MERKER)
Balancing
handsfree calling
-
〈→
p. 135)
Baud
rate AT
Callback
Call diversion
Call list
Call list: ELC in
Call list: ELC out
To Next Page
Loading...
