If in doubt, look it up
114
Menu
items on the display
"
Enter the call number
.
The charges incurred for all calls are displayed in the form of an amount or
charge units.
Y
ou must set this menu item to “ON” for all telephone book entries from
which you wish to receive data calls.
Aborts the respective function.
Y
ou can display a list of the accumulated call charges.
This allows you to dial numbers that are stored in the system, regardless of
your authorization. When you enter the code dial number
, the complete
number is dialed automatically
.
Y
ou can postdial additional digits after the code dial number (e.g. a DID
number).
If you enter “Yes”, the system interprets the stored number as a code dial
number.
Y
ou can speak to two parties simultaneously
. All three parties can speak to
each other
. One of the conference partners must be a refer-back party
.
T
o search for an entry in the main telephone book of your system.
T
urn the display lighter or darker
.
–
Correct the specified number (can also be used for numbers dialed with
the redial key or destination keys).
–
If you inadvertently press the wrong partner key in the partner menu.
Call
number
Call sum
Call with data
Cancel
Charges
Code dialing
Code dial destination
-
Conference
Continue main TB
-
Contrast
Correction
To Next Page
Loading...
