Bosch rexroth 1 Series - Page 18

18/68 General instructions onproperty damage and product damage
Bosch Rexroth AG, A20V(L)O Series 1, RE 93100-01-B/2019-09-10
NOTICE
Danger due tochemical oraggressive environmental conditions!
Product can bedamaged! If theaxial piston unit isexposed tochemical
orcorrosive environmental conditions, such assea water, fertilizer orroad salt,
itcan result incorrosion or, inextreme cases, malfunction. Leaks may lead
toaleakage ofhydraulic fluid.
▶ Take appropriate measures toprotect theaxial piston unit from chemical
orcorrosive environmental conditions.
Leakage orspilling ofhydraulic fluid!
Environmental pollution and contamination oftheground water!
▶ Always place adrip tray under theaxial piston unit when adding and draining
thehydraulic fluid.
▶ Use asuitable binding agent ifhydraulic fluid isspilled.
▶ Observe thesafety data sheet for thehydraulic fluid and thespecifications
provided bythesystem manufacturer.
Danger due toheat development incomponents!
Adjacent products may bedamaged! Due toaheat development incomponents
(e.g. solenoids), adjacent products may bedamaged during assembly ifno
sufficient safety distance iscomplied with.
▶ When installing theaxial piston unit, check thesafety distances tonearby
products toensure that they are not damaged.
The warranty exclusively applies tothe delivered configuration.
The warranty will bevoided iftheproduct isincorrectly installed, commissioned
oroperated, orif itisused orhandled improperly.