Bosch rexroth 1 Series - Maintenance and repair; Overdue inspection and maintenance work; 10.2 Inspection

54/68 Maintenance and repair
Bosch Rexroth AG, A20V(L)O Series 1, RE 93100-01-B/2019-09-10
10 Maintenance and repair
NOTICE
Overdue inspection and maintenance work!
Property damage!
▶ Perform thespecified inspection and maintenance work attheintervals
described inthis manual.
10.1 Cleaning and care
NOTICE
Damage toseals and electrical system due tomechanical effects!
The jet ofahigh-pressure cleaner may damage theseals and electrical system
oftheaxial piston unit!
▶ Do not point ahigh-pressure cleaner atsensitive components, e.g. shaft seal,
electrical connections and components.
For cleaning and care oftheaxial piston unit, observe thefollowing:
▶ Check whether all seals and plug-in connections are securely seated toensure
nomoisture can penetrate into theaxial piston unit during cleaning.
▶ Use only water and, ifnecessary, amild cleaning agent toclean theaxial piston
unit. Never use solvents oraggressive cleaning agents.
▶ Remove major external contamination and keep clean sensitive and important
components, such assolenoids, valves, indicators and sensors.
10.2 Inspection
In order for theaxial piston unit tobe reliable and long-lasting, BoschRexroth
recommends inspecting thehydraulic system and axial piston unit ona regular basis,
and documenting and archiving thefollowing operating conditions: