Bosch rexroth 1 Series - Symbols

About this documentation 7/68
RE 93100-01-B/2019-09-10, A20V(L)O Series 1, Bosch Rexroth AG
Safety instructions are set out asfollows:
SIGNAL WORD
Type and source ofdanger!
Consequences ofnoncompliance
▶ Danger prevention measures
• Warning sign: draws attention tothe danger
• Signal word: identifies the degree ofthe danger
• Type and source ofdanger: indicates the type and source ofthe danger
• Consequences: describes what occurs ifsafety instructions are disregarded
• Precautions: states how the danger can beavoided
Table 2: Hazard classes asdefined inANSI Z535.6
Warning sign, signal word Meaning
DANGER
Identifies adangerous situation that will result indeath
orserious injury ifit isnot avoided.
WARNING
Identifies adangerous situation that may result indeath
orserious injury ifit isnot avoided.
CAUTION
Identifies adangerous situation that may result inminor
tomoderate injury ifit isnot avoided.
NOTICE
Property damage: The product orsurrounding area may
bedamaged.
1.3.2 Symbols
The following symbols indicate notices that are not safety-relevant but increase
understanding ofthedocumentation.
Table 3: Meaning ofsymbols
Symbol Meaning
Ifthis information isdisregarded, the product cannot beused and/or
operated toits full extent.
▶
Single, independent action
1.
2.
3.
Numbered instruction:
The numbers indicate that theactions must becompleted inorder.