Bosch rexroth 1 Series - 7.5 Performing flushing cycle

48/68 Installation
Bosch Rexroth AG, A20V(L)O Series 1, RE 93100-01-B/2019-09-10
7.5 Performing flushing cycle
Inorder toremove foreign particles from thesystem, BoschRexroth recommends
aflushing cycle for theentire system prior toinitial commissioning. To avoid internal
contamination, do not include theaxial piston unit inthe flushing cycle.
Use anadditional flushing unit toperform theflushing cycle. Follow
theinstructions oftheflushing unit's manufacturer for theexact procedure during
theflushing cycle.