LED Color Function
STA Red/orange/green STOP/READY/RUN
ERR Red/orange/green Error status (warning, error)
BT Red/orange/green Boot status
D Red/orange/green Onboard S20: Diagnostics S20 bus
E Red/orange/green Onboard S20: Error or warning of S20 devices
Tab. 12-2: LED block of 10
The displayed device states are firmware-dependent and described
in the functional description of the respective control system
(Rexroth IndraLogic XLC IndraMotion MLC 14 VRS, Functional De-
scription, R911341700).
12.1.3 Operation mode switches
The operation mode switch is positioned on the higher located area of the con-
trol housing.
Fig. 12-4: Operation mode switch
The operation mode switch has three positions:
Switch position
Function
①
Property
Up Run Engaged
Center Stop Engaged
Down Clear Sampling
① Refer to the functional description of the respective control system (Rexroth IndraLogic
XLC IndraMotion MLC 14 VRS, Functional Description, R911341700)
Tab. 12-3: Operation mode switch
IndraControl XM42 Controls 39/65
Device description
R911345566_Edition 03 Bosch Rexroth AG
To Next Page
Loading...
