1 About this documentation
Editions of this documentation
Edition
Release
date
Notes
04 10-2020 Amended frame size MS2N13
03 2018-04 Revision according to project planning manual edition 03, water cooling
02 2016-06 Revision according to project planning manual edition 01
01 2015-05 First edition corrected
01 2015-03 First edition
Tab. 1-1: Record of revisions
1.1 Validity of the documentation
This documentation is valid for Rexroth housing motors of the MS2N series and
must be observed by assemblers, operators, service engineers and facility oper-
ators.
1.2 Additional documentation
Operate this product only, if you have the following documentation available.
You must understand and observe this documentation.
Title Document type Document number
MS2N Synchronous servomotors
Project Plan-
ning Manual
DOK-MOTOR*-MS2N********-PRxx-xx-P
Tab. 1-2: Additional documentation
1.3 Presentation of information
Safety instructions
The safety instructions in this documentation include signal words (danger,
warning, caution, note) and a signal symbol (acc. to ANSI Z535.6-2006).
The signal word is intended to draw your attention to the safety instructions and
describes the seriousness of the danger. The warning triangle with exclamation
mark indicates the danger for persons.
Non-compliance with this safety instructions will result in death or severe per-
sonal injury.
MS2N Synchronous Servomotors
1/101
About this documentation
R911347581_Edition 04 Bosch Rexroth AG
To Next Page
Loading...
Need help?
General