Bosch Rexroth MS2N - Electrical Connection Safety and Types

6.2 Connecting the electric supply
6.2.1 Safety
Danger! Electric voltage! Operations in the vi-
cinity of live parts are extremely dangerous.
WARNING
Any work required on the electric system may be carried out only by
skilled electricians. Tools for electricians (VDE tools) are absolutely
necessary.
Prior to commencing work:
1. Isolate (even auxiliary circuits).
2. Secure against reactivation.
3. Ensure de-energization.
4. Ground and short-circuit.
5. Cover or shield any adjacent live parts.
High electric voltage! Danger to life, risk of in-
jury by electric shock.
WARNING
While the rotor is rotating, motors with permanent magnet excitation
create a voltage > 60 V at the motor connections.
● Any work may only be carried out while the motor is at standstill.
● Never connect or disconnect plug connectors under load!
Never touch the connection points of electro-
static sensitive devices!
NOTICE
Installed components contain electrostatic sensitive devices (EGB).
● Do not touch connection points.
● Observe ESD safety measures.
52/101
Assembly
MS2N Synchronous Servomotors
Bosch Rexroth AG R911347581_Edition 04