Bosch Rexroth REFUspeed RS51 - Type Code, Configuration

3-8 Description REFUspeed RS51
DOK-RD500*-RS51*******-IB02-EN-P
Type code, configuration
Moduleslot 1 2
1234 6789
1
05 1234 6789
2
05
Example:
Abbrev-
Column
CFG-RD500-NN-NN
Note:
B1 = INTERBUS-S slave, remote bus interface
C1 = CANopen interface (with galvanic isolation)
G1 = Incremental encoder emulation with resolver evaluation
G2 = Input for toothed wheel encoder 1 Vpp, TTL, sin/cos and
incremental encoder emulation
G3 = Incremental encoder emulation
K1 = CAN interface (without galvanic isolation)
L1 = SynchroLink (fiber optic cable)
L2 = Peer-to-Peer coupling via fiber optic cable
NN = not equipped
P1 = PROFIBUS-DP slave interface
T1 = expanded control terminal strip
1. Object
1.1 Configuration. . . = CFG
2. Product
2.1 RD500 . . . . . . . . . . . . . . . . = RD500
3. Modulslot 1 and 2
3.1 RD51.1 / RR51.1
3.1.1 B1-B1 B1-L2 B1-NN B1-T1
3.1.2 C1-C1 C1-L2 C1-NN C1-T1
3.1.3 - K1-L2 K1-NN K1-T1
3.1.4 - - L2-NN L2-T1
3.1.5 - - NN-NN NN-T1
3.1.6 P1-P1 P1-L2 P1-NN P1-T1
3.2 RD52.1 / RR52.1
3.2.1 B1-B1 B1-G1 B1-G2 B1-G3 B1-L1 B1-L2 B1-NN B1-T1
3.2.2 C1-C1 C1-G1 C1-G2 C1-G3 C1-L1 C1-L2 C1-NN C1-T1
3.2.3 ----G1-L1 G1-L2 G1-NN G1-T1
3.2.4 ----G2-L1 G2-L2 G2-NN G2-T1
3.2.5 ----G3-L1 G3-L2 G3-NN G3-T1
3.2.6 - K1-G1 K1-G2 K1-G3 K1-L1 K1-L2 K1-NN K1-T1
3.2.7 ------L1-NN L1-T1
3.2.8 ------L2-NN L2-T1
3.2.9 ------NN-NN NN-T1
3.2.10 P1-P1 P1-G1 P1-G2 P1-G3 P1-L1 P1-L2 P1-NN P1-T1
3.3 RS51.1
3.3.1 B1-L2 B1-NN B1-T1
3.3.2 C1-L2 C1-NN C1-T1
3.3.3 - L2-NN L2-T1
3.3.4 - NN-NN NN-T1
3.3.5 P1-L2 P1-NN P1-T1
= only available for RD5X.1
= only available for RR5X.1
= available for RD5X.1 and RR5X.1
Fig. 3-6: Type code, configuration
LSA Control S.L. www.lsa-control.com comercial@lsa-control.com (+34) 960 62 43 01