6-8 Operator control and visualization REFUspeed RS51
DOK-RD500*-RS51*******-IB02-EN-P
Fault
Motor overtemp
5h 24min
Line 1: Fault message
Line 2: Fault cause
Line 3: Fault time
(operating hours)
Fig. 6-11:Fault display
LED display
LED display Significance
No LED bright
Operating status: Power-up inhibit
Not ready to power-up
Green LED bright Operating status: Ready to power-up
Green and yellow LEDs
bright
Operating status: Ready
Yellow LED bright Operating status: Operation (run)
Red LED bright Operating status: Fault
Red and green LEDs
bright
Operating status: After the power supply is
switched-on, during the
power-on initialization
Fig. 6-12: LEDs
LSA Control S.L. www.lsa-control.com comercial@lsa-control.com (+34) 960 62 43 01
To Next Page
Loading...
