Bosch Solution 16i User Guide

Solution 16 i
12
Bosch Security Systems 6/09 BLCC500U FTR1.03
User Guide
Ur=
3. Enter the user number that you want to add, then
press [OK].
If you select a user number which already exists, an
error beep will sound. If this happens select a dierent
user number.
EntPin
4. Enter the new PIN for the user you have selected.
If an error tone sounds, try a dierent PIN. The display
will show ==== as you enter the new PIN.
5. Press [OK] to save and exit, or press [MENU] to exit
without saving.
Access > PIN Codes >
DELPin
Delete PIN
MENU 1-1-3
This menu allows a master user the ability delete another
users PIN. A Master user can only delete a PIN for users that
have been assigned to the same area(s) as the Master user.
A Master user cannot delete their own PIN.
1. Enter your Master PIN + [MENU].
2. Enter [1] + [1] + [3] + [OK].
The keypad will display the Ur = prompt.
Ur=
3. Enter the user number you want to delete, then press
[OK].
Del ?
If you have selected a valid user, the system will ask you
to conrm the deletion.
4. Press [OK] to delete the PIN, or press [MENU] to
cancel.
Proximity Tokens & Cards
Proximity tokens and cards can be used as an alternative to
a PIN number when on and o the system.
A token is a small plastic tag card that has a unique ID. A
user can place the token card in front of a reader keypad to
turn the system or specic areas on and o.
This feature requires that at least one keypad that has an in-
build prox reader tted. This section outlines how to add
and delete proximity tokens or cards. If you try to add a
token from a keypad that does not have an in-built reader,
the keypad will prompt you to select the reader you wish
to learn the new token.
You should discuss this feature with your installer for more
details on your particular installation.
Access > Token >
AddPrO
Add Token
MENU 1-2-0
This menu allows a master user to add a new token for
other users provided they are assigned to the same area(s)
as the Master user.
This feature requires that at least one keypad that has an
in-build prox reader tted.
1. Enter your Master PIN + [MENU].
2. Enter [1] + [2] + [0] + [OK].
The keypad will display the Ur = prompt.
Ur=
2. Enter the user number you want to add the token to,
then press [OK].
If you are currently using a keypad with built in reader
the system will prompt you to present the new token
to the keypad.
PrSEnt
2. Present the token at the keypad to learn the new
token.

Bosch Solution 16i Specifications

General

Brand	Bosch
Model	Solution 16i
Category	Security System
Language	English