Bosch Solution 16i User Guide

Solution 16 i
6
Bosch Security Systems 6/09 BLCC500U FTR1.03
User Guide
All On
When you turn an area All On, you are turning on all non 24-
hour zones, both interior (motion detectors) and perimeter
(doors and windows of the building).
Part On
When you turn an area Part On, you only turn on some of the
non 24-hour zones. Your security company will program
which zones are included in this portion. Part zones may
include only the perimeter (doors and windows) of your
alarms system, or sensors in other areas of your premises.
Check with your installation company to learn which zones
are Part zones.
Repor ti n g Alarms
Your system may be programmed to send reports to
a alarm monitoring centre. These centres are maned
24hrs a day and can take action on your behalf when
an alarm occurs. Once the alarm report is complete,
the system returns the telephone to normal operation.
Your security company will advise you how your system
has been congured for alarm reporting.
Your system will make repeated attempts to send reports
to the monitoring centre. If your system fails to report, the
keypad will display the ‘service’ symbol.
About the Keypad
Your keypad has 20 keys. The keys allow you to input
instructions and perform programming as required. Some
keys have a secondary function which is activated by press
and holding them down for two seconds.
Each keys’ function is described below:
Keypad Keys
Key Description
to
The numeric keys allow you to enter
you numbers when required.
Use the [MENU] and the numeric keys
to enter commands. The [MENU] key
is also used to go back one level when
navigating through menus or to exit a
programming location without saving
changes.
The [ON] key allows you to turn an area
or output on. To turn all areas on at the
same time when the system has been
partitioned, press and hold the [ON]
key for two seconds.
The [PART] key allows you to turn an
area Part On. This key can also be used
to bypass a zone or multiple zones
when you press and hold for two
seconds.
Key Description
The [OFF] key allows you to turn an
area or output o. To turn all areas o
at the same time when the system has
been partitioned, enter PIN and press
and hold the [OFF] key for two seconds.
The [OK] key allows you to select
options and conrm programming
changes.
The [MAIL] key is used to initiate a
dialer test when you press and hold for
two seconds.
The [] key allows you to move the
cursor left when programming text or
telephone numbers.
The [] key allows you to move the
cursor right when programming text
or telephone numbers.
The [↑] key allows you to navigate
through menus or to toggle characters
when programming text or telephone
numbers.
The [] key allows you to navigate
through menus or to toggle characters
when programming text or telephone
numbers. Pressing The [] key will
display current trouble conditions
when the area that the keypad is
displaying is disarmed.
+
for 2 sec
Pressing the [] and [↑] keys together
and holding them down for 2 seconds
will cause trigger a Panic alarm. If
programmed the sirens will sound and
the monitoring station will be notied.
+
for 2 sec
Pressing the [] and [] keys
together and holding them down for
2 seconds will trigger a Fire alarm. If
programmed the sirens will sound and
the monitoring station will be notied.
+
for 2 sec
Pressing the [↑] and [] keys together
and holding them down for 2 seconds
will trigger a Medical alarm. If
programmed, the sirens will sound and
the monitoring station will be notied.
Table 2: Keypad Keys and Their Function
KEYPAD E M E R GENC Y AL A R M TRIGGE R ’S
Key Sequence Event Triggered
Ë + Ê Hold for 2 seconds
Keypad Fire Alarm
Ê + È Hold for 2 seconds
Keypad Panic Alarm
È + Â Hold for 2 seconds
Keypad Medical Alarm
Table 3: Keypad Emergency Alarm Trigger’s

Bosch Solution 16i Specifications

General

Brand	Bosch
Model	Solution 16i
Category	Security System
Language	English