Bosch Solution 16i User Guide

25
Bosch Security Systems 6/09 BLCC500U FTR1.03
Solution 16 i User Guide
Call Forward On All Calls -
Immediate
[*][2][1] [Phone Number] [#]
or
If No Answer
[*][6][1] [Phone Number] [#]
or
If No Answer (After 5 to 60 Seconds)
[*][6][1] [Phone Number] [*] [Time In Seconds] [#]
For other countries please substitute the appropriate
commands after consultaion with your telephone company.
1. Enter your Master PIN + [MENU].
2. Enter [5] + [1] + [6] + [OK].
The keypad will display the current call forward on
number sequence.
A61PA2
The default sequence A61PA20H is explained below.
You should modify this sequence to suit your particular
requirements or ask your installer to congure for you.
A61 = (Turn Call Forward On – No Answer).
P = (2 Second Pause).
A20H = (Delay Call Forward sequence for 20 seconds).
3. Using the combination of numeric keys and [↑] and
[↓] keys to program special characters, enter all the
digits of the call forward on sequence.
You can change a single digit by moving the cursor
position using the [←] and [→] keys.
Example:
For the control panel to initiate the sequence
of forwarding all calls immediately to the
telephone number 0212345678, a sequence of
A210212345678H would be programmed.
4. Press [OK] to save and exit, or press [MENU] to exit
without saving.
i
Note
For more information on how to use the Call
Fowarding features contact your telephone service
provider or your installer.
When programming telephone numbers the
following symbols have a special meaning or
function. A = *
H = #
P = Pause (2 second)
Comms > Commands >
cfOfPh
Call Forward Off
MENU 5-1-7
When you enter your premises, you no longer need to
remember to manually disable the Call Forward feature
via the telephone. This option allows you to program
the Call Forward O sequence that the control panel will
automatically use when you turn Area 1 ‘O’.
In Australia, a typical sequence of activating the Call
Forward O feature is described below:
Call Forward O All Calls -
Immediate
[*][2][1] [#]
or
If No Answer
[*][6][1] [#]
For other countries please substitute the appropriate
commands after consultaion with your telephone company.
1. Enter your Master PIN + [MENU].
2. Enter [5] + [1] + [7] + [OK].
The keypad will display the current call forward o
sequence.
H61h
The default sequence H61H is explained below. You
should modify this sequence to suit your particular
requirements or ask your installer to congure for you.
H61 (To turn Call Forward With No Answer O).
H (End of Call-Forward sequence)
3. Using the combination of numeric keys and [↑] and
[↓] keys to program special characters, enter all the
digits of the call forward o sequence.
You can change a single digit by moving the cursor
position using the [←] and [→] keys.
For special characters (eg. P = pause, A=* or H=# etc),
use the [↑] and [↓] keys.
4. Press [OK] to save and exit, or press [MENU] to exit
without saving.

Bosch Solution 16i Specifications

General

Brand	Bosch
Model	Solution 16i
Category	Security System
Language	English