Bosch Solution 16i User Guide

Solution 16 i
16
Bosch Security Systems 6/09 BLCC500U FTR1.03
User Guide
PArt 1
If the area is turned Part 2 On, the keypad will display:
PArt 2
4. To exit, press [OK].
Areas > Commands >
L201
Turn Area On
MENU 2-0-1
This menu allows you to turn a single area All On. If your
system has been congured to have multiple areas then
the keypad will prompt you to select the area you wish to
turn All On.
1. Enter your Master PIN + [MENU].
2. Enter [2] + [0] + [1] + [OK].
If your system has been congured to have more than
one area, the keypad will display the A = prompt.
A=
3. Enter the area number you wish to turn All On, then
press [OK].
Areas > Commands >
L202
Turn All Areas On
MENU 2-0-2
This menu allows you to turn on all areas that your PIN
has been assigned to at the same time All On. The keypad
displays below show the area icons 1 and 2 on indicating
that both Area 1 and Area 2 are armed.
1. Enter your Master PIN + [MENU]
2. Enter [2] + [0] + [2] + [OK].
The keypad will display the word “LEAVE” in the
display and the exit warning beeper will sound. You
should leave all areas now.
POWER
ON
When exit time has expired, the keypad will display
that the home area (Area 1 in this case) is on, and that
area 2 is also on via the area icons.
POWER
ON
AREA
i
Note
Area icons will only display if programmed to do so
by your security installer.
Areas > Commands >
L203
Turn All Areas Off
MENU 2-0-3
This menu allows you to turn o all areas that your PIN has
been assigned to at the same time. At least one keypad
on the system must be in a diasrmed area before you can
access this command.
1. Enter Master PIN + [MENU].
2. Enter [2] + [0] + [3] + [OK].
The system will now disarm all areas that are in the
armed condition provided the user belongs or has
access to the area.
Areas > Commands >
L204
Move To Area
MENU 2-0-4
This menu allows you to move the focus of a keypad’s
default home area to a dierent area. Once the keypad’s
focus has changed, you will be able to see the status of the
zones in that area and also perform functions as if you were
using the keypad located or assigned to that area.
1. Enter [Master PIN] + [MENU]
2. Enter [2] + [0] + [4] + [OK].
If your system has been congured to have more than
one area, the keypad will display the A = prompt.
A3 OFF
3. Enter the area number (1 to 4) that you want to move
to, then press [OK].
The keypad will now move to the requested area. If you
do not have acces to the selected area the system will
sound a error beep and the keypad focus will remain
un-changed.
The keypad will return to it’s home area, 30 seconds
after the last key press.
i
Note
If the keypad has been programmed to be a roaming
keypad then you can use the [←] and [→] keys to
move between areas at any time.

Bosch Solution 16i Specifications

General

Brand	Bosch
Model	Solution 16i
Category	Security System
Language	English