Bosch Solution 16i User Guide

Solution 16 i
26
Bosch Security Systems 6/09 BLCC500U FTR1.03
User Guide
Comms > MyAlarm >
EMAiL
Email Address
MENU 5-5-8
This menu allows the master user to program the email
address that the system will send reports to.
1. Enter your Master PIN + [MENU].
2. Enter [5] + [5] + [8] + [OK].
The keypad will display the current email address.
_
3. Use the numeric, [0] to [9], [←] and [→] keys to enter
or hange the email address as required.
At any time you can use the [↑] and [↓] keys to scroll
through the complete list of available characters.
To clear all characters from the cursor position to the
right, press the [OFF] key.
4. When the email address is complete, press [OK] to
save and exit, or press [MENU] to exit without saving.
5. To stop email reporting simply remove the email
address or disable all of the email options.
i
Note
When entering an email address the @ symbol is
represented on the keypad display as
. To enter
this character continually press the 1 key until the
symbol appears. For more information
see “Table 7: Text Character Set” on page 10.
Comms > MyAlarm >
E-OPtS
Email Options
MENU 5-5-9
This menu allows the master user to program which types
of system events are sent via email.
Option Description
1 Open/Close Reports
2 Zone Alarm
3 Zone Trouble
4 System
5 Access
6 Reserved
7 Reserved
8 Reserved
Table 13: Email Options
1. Enter your Master PIN + [MENU].
2. Enter [5] + [5] + [9] + [OK].
The keypad will display the current options which are
selected or enabled.
-bit-
1 2 3 4
3. Use the [1] to [8] keys to turn on and o the features
as required. When the corresponding number on the
keypad is on then the option is selected.
4. When all email options are programmed, press [OK]
to save and exit, or press [MENU] to exit without
saving.
Comms > Periodic Test >
tst-dl
Send Test Report
MENU 5-9-0
This menu allows you to test the reporting functions of the
control panel by manually sending a ‘Test’ report to the
receiving party (i.e. security company monitoring station,
mobile telephone etc).
1. Enter your Master PIN + [MENU].
2. Enter [5] + [9] + [0] + [OK].
The test will begin and the keypad will display that
testing is in the progress. The test may take up to 3
minutes to complete.
ph tst
If the test is successful, the keypad will prompt:
pAss
If the test is NOT successful, the keypad will prompt:
fAil
3. Press [OK] or [MENU] to exit.

Bosch Solution 16i Specifications

General

Brand	Bosch
Model	Solution 16i
Category	Security System
Language	English