Bowa ARC 350 - Page 112

10 Technical specifications
112 Operating Manual ARC 350 900-351_IFU_V2.0.0_20221-S0-20150520-EN
Bipolar Coagulation – Standard forceps AUTOSTART
Measurement at ohmic resistances
 Diagram of power output P [W] as a
function of the load resistance R [] for
the setting "Bipolar Coagulation
Standard forceps AUTOSTART"
= 60 W
Measurement at ohmic resistances
 Diagram of power output P [W] as a
function of the load resistance R [] for
the setting "Bipolar Coagulation
Standard forceps AUTOSTART"
= 120 W
 Diagram of power output P [W] as a
function of the setting " Bipolar
Coagulation Standard forceps
AUTOSTART"
Rated load resistance = 50 
 HF output voltage U [Vp] for the setting
" Bipolar Coagulation Standard forceps
AUTOSTART"
(idle mode)
= 150 Vp